How Do I Disassemble The Spray Gun?
The method for disassembling a spray nozzle depends on its specific type. The following are the disassembly steps for two common types of spray nozzles:
Disassembly of the AKB1311 Smart Toilet Spray Nozzle
Prepare Tools: You will need a Phillips screwdriver. Ensure the tool matches the screw specifications to prevent stripping the threads or damaging the screw heads.
Remove Fixing Screws: Locate the fixing screws on both sides of the spray nozzle. Use the Phillips screwdriver to loosen and remove them one by one by turning them clockwise. These screws are typically located at the junction where the nozzle connects to the main toilet body; observe carefully to ensure none are overlooked.
Disconnect the Connection Hose: Once you have lifted the spray nozzle, locate the hose connecting it to the water supply (usually made of plastic or metal). Gently rock the hose back and forth while slowly pulling it out; avoid using excessive force, which could deform the hose opening or cause leaks.
Disconnect Electrical Connections: If the spray nozzle features electric functions (such as cleaning or drying), locate the cable connecting it to the main control board (typically a flat ribbon cable or a plug-in connector). Pinch the latches on both sides of the plug-or pull in the direction indicated by any arrows-to disconnect it; never pull directly on the cable itself.
Remove the Spray Nozzle: Once the above steps are complete, the spray nozzle can be completely separated from the main toilet body and placed in a dry location for safekeeping.
Disassembly of a Standard Manual Spray Nozzle
Remove the Cap: Some spray nozzles feature a protective cover (cap) at the top; this must first be removed-either by rotating it counter-clockwise or by pulling it straight upward-to expose the internal components.
Disconnect the Hose: Use two 22mm wrenches (or adjustable wrenches) to secure both the main nozzle body and the hose connection point. Hold the lower section of the nozzle firmly with one hand while rotating the hose connector with the other; turn it counter-clockwise to loosen, then pull it free. If the connection is seized, applying a small amount of lubricant may assist in the disassembly process.
Separate the Nozzle Body: Place the nozzle with its wider end facing downward, then gently tap the base of the nozzle body with your hand or a tool to loosen the internal components. Subsequently, carefully pry open the nozzle body, taking care to watch for internal springs or sealing rings to avoid losing or damaging them.
Important Considerations:
Before disassembling, shut off the water supply or power source (for electric spray nozzles) to prevent accidental activation or water leakage. Wear gloves during operation to avoid scratches or contact with sharp components.
If the spray gun has not been used for an extended period, it is recommended to disassemble it and rinse the interior with clean water to prevent clogging or corrosion.
When reassembling, proceed in reverse order and ensure that all connections are securely sealed.
